產品介紹
And the laminate used in the rack must be 25 mm thick high density board, of course, can also be replaced by iron plate, but this cost will be raised, there is no indispensable. The process must be pickled first, then three processes to rust, deoiling, then baking at high temperature, then spraying powder, the temperature must be adjusted to the appropriate, and the paint line must not be less than 300 meters above the plane contact line of the river. Packaging, must wait for good varieties of high-quality genuine shelf cooling, unified on the carpet package Otherwise, it will be easy to scratch
Use angle to attract customers而層架所用的層板 要25mm厚的高疏密程度板，當然也可以用鐵板接替，但這么成本會拉高，也沒有不可缺少的。工藝 要先酸洗，再過三道工序去銹，除油，而后再高溫烘焙，再噴粉，溫度 要調到合宜，并且烤漆線不可少要300米以上的逝川平面接觸線，這么受熱溫度與時間才可以讓粉附在鐵材料外表上，因此起到盡力照顧材料不生銹，道具外表光澤。包裝方面， 要等優良的品種品 貨架冷卻后，一統在地毯上包裝，否則會容易有劃痕
利用角度，吸引客戶
